GE Voluson 730Pro, Basic User Manual

Page: 355 / 480

Sonoview
15.3.6 To Measure Ellipse
Using this function an ellipse can be drawn in an image to measure the circumference and
area.
Note: The Full Screen View must be selected, otherwise this function does not work.
Select the
[
Ellipse
]
icon and move the cursor to the image. The cursor changes to a “ + ”.
Place the cursor at the start point to begin drawing of the ellipse, and then press the right or left
trackball key [Set].
After placing the cursor to the opposite end point of the area, press the right or left trackball key [Set].
Now adjust the size of the ellipse by moving the trackball. Press the right trackball key [Set] after
moving the trackball to adjust the shape and size of the ellipse. The circumference and area of the
drawn ellipse will be displayed on the screen.
Several measurements can be made in the same manner.
Click the
[
Ellipse
]
icon again to exit the measurement function.
Select the
[
Clear Measurements
]
button on the lower part of the
image to delete the displayed measurements.
15.3.7 Voice Recorder
Record a voice comment with the image.
To record voice proceed as follows:
Place the cursor in the image to comment and press the right trackball key [Set].
When the recording has started, the dialogue box and recording time is displayed as seen below.
Click the
[
Stop
]
button to finish recording.
Voluson
®
730Expert - Basic User Manual
105850 Rev. 0
15-15