Calculations and Patient Reports
To change measuring marks before completion press the upper trackball key
[
Change
]
.
Depending on the setting in the Measurement Setup, also the
[
Freeze
]
key can be used
for confirming the last measuring mark of the currently performed measurement.
review:
General Measurement Setup
chapter 18.3.1
.
To cancel the measurement of the currently selected item, select
[
Cancel
]
,
or press the
[
Backspace
]
key on the keyboard.
To delete the results of the last measured item, select
[
Undo Last
]
,
or press the
[
Backspace
]
key on the keyboard.
To delete all measurement results of the selected group from the monitor as well
as from the corresponding report, select
[
Clear Group
]
,
or press the
[
Delete
]
key on the keyboard..
To erase results:
- press the
[
Delete Meas.
]
key on the keyboard,
- or press the
[
Clear all
]
key on the control panel
To exit the Calculation program:
- press the
[
Exit
]
key on the control panel,
- or press the
[
Caliper
]
key on the control panel
•
Moving the trackball after completion of a measurement activates the next measurement.
•
Depending on the setting in the Measurement Setup, the displayed measurements will be shown with
or without Caliper Information Text review:
General Measurement Setup
chapter 18.3.1
.
•
The measured items are marked with a “check mark”.
•
When the result display is full, (maximum 4) the first measurement will be overwritten first.
•
When starting a new scan (unfreeze), previously set measuring marks are erased.
•
Except for Auto Trace measurements, all measurement results will be automatically included in the
corresponding Patient Report.
If you want to store Auto Trace measurement results in the report, you have to press the right or left
trackball key
[
Store
]
previously.
Remark:
Depend on the setting in the Measure Setup, the last measuring mark of the currently
performed measurement will be only confirmed with the
[
Set
]
keys
or
with the
[
Set
]
- &
[
Freeze
]
keys.
After confirming the measurement, the results will be included in the patient report.
To select the “Store Measurements” method review:
General Measurement Setup
chapter 18.3.1
.
Voluson
®
730Pro - Basic User Manual
14-4
105831 Rev. 0
Summary of Contents for Voluson 730Pro
