Fukuda Denshi DSL-8001, Operation Manual

Page: 11 / 252

ix
Precautions for Safe Operation of Medical Electrical
Equipment
CAUTION
Read the following precautions thoroughly to correctly
operate the equipment.
 Users should have a thorough knowledge of the operation
before using this equipment.
 Pay attention to the following when installing and storing the
equipment.
 Do not install or store in an area where the equipment will
be subject to splashing water.
 Do not install or store in an area where the environmental
conditions, such as atmospheric pressure, temperature,
humidity, ventilation, sunlight, dust, sodium, sulfur, will
adversely affect the equipment.
 Place the equipment on a stable surface where there is no
inclination, vibration, or shock (including during
transportation).
 Do not install or store in an area where chemicals are
stored or gasses are evolved.
 Verify the power frequency, voltage and allowable current
(or power consumption).
 Ensure the grounding is proper by connecting the
accompanying power cable to the hospital grade outlet.
 Before operating the equipment, verify the following items.
 Verify the power voltage.
 Check the cable connection and polarity to ensure proper
operation of the equipment.
 Make sure the power system has adequate earth ground.
 Ensure that all cables are firmly and safely connected.
 Pay special attention when the device is used in
conjunction with other equipment as it may cause
erroneous judgment and danger.
 Ensure all patient connections are proper and secure.
 During operation of the equipment, verify the following items.
 Always observe the equipment and patient to ensure safe
operation of the equipment.
 If any abnormality is found on the equipment or patient,
take appropriate measures such as ceasing operation of
the equipment in the safest way for the patient.
 Do not allow the patient to come in contact with the
equipment.
 Do not touch any of the signal input or output parts at the
same time as the patient.