Fukuda Denshi DSL-8001, Operation Manual

Page: 65 / 252

2 － 15
 Standard Mode
6 7 8 9 10 11 12 13 14
1
2
3
4
5
15
16
17
18
19
1 Waveform 1 Display Area Displays the waveform set for each display area.
By selecting the waveform display area (aligning
the jog dial marker to the display area), “Display
Setup” window will be displayed.
By assigning the same parameter to more than
one display area, cascade waveform can be
displayed.
2 Waveform 2 Display Area
3 Waveform 3 Display Area
4 Technical Alarm Area Displays technical alarm messages.
5 Vital Alarm Area Displays vital alarm messages.
6 Remaining Battery Power
Display
These are the icons which indicate the
equipment status or which are used as short cut
keys to access the setup windows.
Reference
For details, refer to “
●
Icons Displayed on the
Window”.
7 Patient Classification Icon
8 Alarm Limit Setup Icon
9 Main Menu Icon
10 Switch Display Icon
11 Table/Trend
Icon
12 Telemeter Status
13 Ventilator Status
14 Time Display Area
15 HR/PR Numeric Data Box Displays HR or PR numeric data. When
selected, displays “HR/PR Setup” window.
16 SpO
2
Numeric Data Box Displays SpO
2
numeric data. When selected,
displays “SpO
2
Setup” window.
17 NIBP Numeric Data Box Displays NIBP numeric data. When selected,
displays “NIBP Setup” window.
18 RESP Numeric Data Box Displays RESP numeric data. When selected,
displays the “RESP Setup” window.
19 TEMP Numeric Data Box Displays TEMP numeric data. When selected,
displays the “TEMP Setup” window.