Fukuda Denshi DSL-8001, Operation Manual

Page: 14 / 252

xii
CAUTION
 Precautions about the Management
 The institution appoints a person to manage the wireless
channels for the whole medical institution. And when using
telemetry which requires zone location, the Institution
should nominate a person to manage the wireless
channels in each zone (a “Zone Manager”). However,
when using such telemetry in a local medical institution,
one person can perform both functions.
 Select a telemetry manager who understands the
characteristics and functionality of telemetry systems, and
is skilled in operating telemetry.
 When installing telemetry, the Overall Manager and the
Zone Manager have to understand the precautions for use
of the telemetry in advance.
 The Overall Manager takes responsibility of wireless
channel management and transmitter storage for the
whole Institution by giving proper instruction.
 The Overall Manager should create a management log
(hereinafter referred to as the
“
log
”
), which contains a list
of the management status of the wireless channels for the
whole Institution. When changing a wireless channel,
register it in the log and give proper instructions to the
Zone Manager or to the user.
 The Zone Manager assumes responsibility for managing
the wireless channels, storing, and managing telemetry.
 The Zone Manager assigns the transmitter to the user, and
provides enough education for use inside the zone.
 The telemetry user verifies operation of the
transmitter/receiver before use.
 The telemetry user, if using the telemetry in a zone
location, follows the instructions of the Zone Manager for
the zone and gives instructions to the patient if required.
 When interference or breakdown occurs in telemetry
communication, the user is required to inform the zone
manager and the overall manager of the problems. The
Zone Manager and Overall Manager are to deal with the
problem properly and/or contact their nearest Fukuda
Denshi representative for service.
 Precautions about the Setting
 Connection of the HLX-801 Telemetry Transmitter Module
will be performed by our service representative. Users
should not perform this procedure as malfunction of the
equipment may occur.
 The setup of channel ID and group ID should be
performed only by the telemetry manager of your system
or our service representative. Users should not perform
this procedure as malfunction may occur.
 On a wireless network, the alarm generated on this unit
will be transmitted to the central monitor with a maximum
of 15 seconds delay.