Fukuda Denshi DSL-8001, Operation Manual

Page: 78 / 252

2 － 28
Alarm Function
This section describes about the alarm function.
CAUTION
On a wireless network, the alarm generated on this unit will be
transmitted to the central monitor with a maximum of 15 seconds
delay.
Alarm Level and Alarm Tone
Depending on the alarm level, sound, color, and alarm indicator will differ.
Alarm Level
(Definition)
Sound*
Characters
/Background
Color
Alarm
Indicator
Color
Frequency
of flashing
Level 1
(Life Threatening)
Continuous tone
White/Red Red 2Hz
Level 2
(Cautionary)
5 seconds
interval tone Black/
Yellow
Yellow 0.6Hz
Level 3
(Treatment Needed)
Single beep tone
White/Blue Yellow Lighting
Level 4
(Notification Alarm)
Display Only Black/
White
- -
* Alarm Sound Pattern (Pattern 1 / Pattern 2) can be selected on the “Sound
Setup” window.
CAUTION
 The alarms are classified into Level 1 (High Priority), Level 2
Medium Priority), Level 3 (Low Priority), Level 4 (Notification),
and the alarm message will be displayed according to the
priority of level 1>level 2
> level 3>level 4.
 If more than one alarm is generated, alarm messages will be
displayed by switching the alarm messages in 2-second
intervals.