Fukuda Denshi DSL-8001, Operation Manual

Page: 86 / 252

2 － 36
 Manual Printing
For manual printing (standard printing), pressing the (Print) key will
start / stop the printing.
Pressing the key during alarm or table printing will stop the printing.
The waveform and measurement value are printed from the time when the
(Print) key is pressed.
Printing will start from 8 seconds (the programmed delay time) before pressing
the
(Print) key.
The delay time can be set to specify the starting point of printing (duration before
pressing the
(Print) key).

Alarm Printing
The waveform and measurement value will be automatically printed at alarm
occurrence.
If the alarm is generated during manual or table printing, the printing will stop.
 Periodic Printing
The waveform and measurement value will be automatically printed at the
programmed time.
 Table Printing
Pressing the (Print) key while the table is displayed will print the
displayed table data.
Only the displayed table data will be printed if the
(Print) key is
pressed for a short time, while all the table data will be printed if the
(Print) key is pressed for a long time (2 seconds or more).