Fukuda Denshi DSL-8001, Operation Manual

Page: 134 / 252

4 － 22
Periodic Printing Setup
The following can be set for periodic printing.
・
Periodic Printing (ON/OFF)
・
Output Printer (Built-in / Center)
・
Printing Waveform (OFF / ECG1 / ECG2 / RESP / SpO
2
)
・
Printing Duration (6 sec./12 sec./24 sec.)
・
Printing Interval (5 min./ 10 min./ 15 min./ 30 min./ 60 min./120 min.)
● Periodic Printing
1 Press the (Menu) key, and select “Printing Setup” > “Periodic
Printing Setup”.
The "Periodic Printing Setup" window
will be displayed.
2 Select [ON] or [OFF].
If the [ON] is selected, the printing will automatically start at selected interval.
●
Output Printer
Set the output printer for the periodic printing.
If [Center] is selected, the data will be outputted on the central monitor printer.
1 Press the (Menu) key, and select “Printing Setup” > “Periodic
Printing Setup” > “Output Printer”.
2 Select [Built-in] or [Center].