Fukuda Denshi DSL-8001, Operation Manual

Page: 175 / 252

7 － 9
Channel ID and Group ID Setup
CAUTION
The setup of channel ID and group ID should be performed
only by our service representative. Users should not perform
this procedure as malfunction of the equipment may occur.
It is necessary to set the channel ID in order to connect to the wireless network.
Once the transmitting channel ID and group ID are programmed, these will be
retained even after the main power is turned OFF.
1 Select the (Menu) key, and select “Initial Setup” > “Telemeter
Setup”.
The "Telemeter Setup" window will be
displayed.
2 Select [ON] / [OFF] for “Telemeter Function”.
If [OFF] is selected, telemetry transmission will not be performed.
To perform telemetry transmission, select [ON].
3 Select “Channel” on the Telemeter Setup menu.
The “Channel” window will be
displayed.
4 Select the channel number.
When the numeric turns yellow, turn the jog dial and set the 4-digit medical
telemetry channel ID.
5 Set “Group ID” in the same manner.
Set the group ID in the range of 00 to
63.