Fukuda Denshi DSL-8001, Operation Manual

Page: 67 / 252

2 － 17
 Auto Zoom Mode
If the ECG cable is disconnected for 10 seconds or more during operation, the
home display will automatically switch to auto zoom mode.
Also, if the ECG cable is connected during the auto zoom mode, the display
mode returns automatically to the zoom mode.
Reference
To use the auto zoom mode, it is necessary to select ON for “Auto Zoom
Mode”. For setup procedure, refer to “4. Monitoring Setup Display Setup”.
15
16
17
5 6 7 8 9 10 11 12 13
1
2
3
4
1 Waveform 1 Display Area Displays the SpO
2
waveform when in auto zoom
mode. When selected, displays the “Display
Setup” window.
2 NIBP Numeric Data Box Displays NIBP numeric data. When selected,
displays “NIBP Setup” window.
3 Technical Alarm Area Displays technical alarm messages.
4 Vital Alarm Area Displays vital alarm messages.
5 Remaining Battery Power
Display These are the icons which indicate the
equipment status or which are used as short cut
keys to access the setup windows.
Reference
For details, refer to “
●
Icons Displayed on the
Window”.
6 Patient Classification Icon
7 Alarm Limit Setup Icon
8 Main Menu Icon
9 Switch Display Icon
10 Table/Trend Icon
11 Telemeter Status
12 Ventilator Status
13 Time Display Area
14 HR/PR Numeric Data Box Displays HR or PR numeric data. When
selected, displays “HR/PR Setup” window.
15 SpO
2
Numeric Data Box Displays SpO
2
numeric data. When selected,
displays “SpO
2
Setup” window.
16 TEMP Numeric Data Box Displays TEMP numeric data. When selected,
displays the “TEMP Setup” window.