Fukuda Denshi DSL-8001, Operation Manual

Page: 222 / 252

9 － 6
NOTE
The SpO
2
measurement accuracy is determined based on the
values of the root-meansquare (rms) difference between SpO
2
readings of the pulse oximeter equipment and values of SaO
2
determined with a CO-oximeter, by healthy adult volunteers.
The pulse oximeter equipment measurements are statistically
distributed; ±2% measurement accuracy means that only about
two-thirds of pulse oximeter equipment measurements can be
expected to fall within ±2% of the value measured by a
CO-oximeter.
NIBP (Non-Invasive Blood Pressure)
(EN 60601-2-30: 2000 / IEC 60601-2-30: 1999 Medical electrical equipment-
Part 2: Particular requirements for the safety of automatic cycling indirect
blood pressure monitoring equipment)
(AAMI SP10: 2002+A1:2003+A1:2006+(R)2008 Manual, electronic or
automated Sphygmomanometers)
Measurement Method : Oscillometric Method
Measurement Range : Adult 10 to 280mmHg/1.3 to 37.3kPa
Child 10 to 180mmHg/1.3 to 24.0kPa
Neonate 10 to 130mmHg/1.3 to 17.3kPa
Resolution : 1mmHg
Static Pressure Accuracy : ± 3 mmHg/0.4kPa
Accuracy
Maximum Standard Deviation : 8mmHg/1.0kPa
Maximum Average Error
: ± 5mmHg/0.6kPa
PR Measurement Range : 40 to 240bpm
PR Measurement Accuracy : ± 2% or ± 2 bpm, whichever greater.
Deflation Speed : 5 ± 1 mmHg/sec (Quick Measurement OFF)
10 ± 2 mmHg/sec (Quick Measurement ON)
Safety Mechanism : Adult 300mmHg or above
Child 210mmHg or above
Neonate 150mmHg or above
NOTE
Blood pressure measurements determined with this device are
equivalent to those obtained by a trained observer using the
cuff/stethoscope ausculation method, within the limits prescribed
by the American National Standard, Electronic or automated
sphygmomanometers.
Printing (Printer Unit)
Printing Speed : 50mm/s, 25mm/s (Error: within ± 5%)
Resolution : 8 dots/mm
Printing Waveforms : Maximum of 3 waveforms
Printing Type : Manual Printing, Alarm Printing, Periodic Printing, Table
Printing, Trend Printing
Detection : Paper Out