Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
177
The procedure to update a key in the key group is as follows:
Procedure
1
Click [Update SED Key] in [Action].
2
Select whether to use the current key again.
The main setting item is as follows.
●
Current SED Authentication Key Setting
•
Current Key
3
Click the [Update] button.
A confirmation screen appears.
4
Click the [OK] button.
Updating of the SED Authentication Key starts.
5
Click the [Done] button to return to the [Key Group] screen.
End of procedure
If an error screen appears under the following conditions, check the parameter settings.
•
When the master server for the key group is not registered
•
When one of the following statuses applies to the key in the key group:
-
Unregistered Server Certificate
-
Expired Server Certificate
-
No SSL Certificate
-
Network Error
-
Key Server Error
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
