Fujitsu Eternus DX200F, User Manual

Page: 824 / 1082

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
824
• Host Response
• Checkbox to select a host
●
Host Setting
• WWN
A.4.2.5 Modify Host Group (iSCSI)
For details about this function, refer to "4.2.7 Modify Host Group (iSCSI)" (page 391) .
●
Host Group Setting
• Host Group Name
Description Select a host response that is to be assigned to a host group.
The host response list created in the ETERNUS DX is displayed.
Input condition/
Display contents
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
Description Select the corresponding host checkbox in the FC host list, to add a host. Clear the
corresponding host checkbox in the FC host list, to delete a host.
Input condition/
Display contents Checkbox
•
Selected
•
Cleared
FC hosts that are set for the host affinity of which the Virtual Volume function is enabled are not displayed.
Description Input the WWN for the FC host.
Input condition/
Display contents
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
Description Specify the host group name.
An existing host group name cannot be used. Refer to "Naming conventions for adding
hosts" (page 1053) for details.
Input condition/
Display contents
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces