Fujitsu Eternus DX200F User Manual Download Page 583

Page: 583 / 1082

Chapter 6 Thin Provisioning Pool Management
6.9 Modify Cache Parameters (Thin Provisioning Pool)

ETERNUS Web GUI User’s Guide (Settings)

P2X0-1270-13ENZ0

583

Change the cache parameters.

The main setting item is as follows.

●

Parameters Setting

•

Multi Writeback Count (MWC)

Click the [Modify] button.



A confirmation screen appears.

Click the [OK] button.



The cache parameter modification starts.

Click the [Done] button to return to the [Threshold] screen.

End of procedure

If the [Default] button is clicked before the [Modify] button, the default cache parameters are
restored.

Summary of Contents for Eternus DX200F


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Eternus DX200F

Reviews:

Fujitsu Eternus DX200F, User Manual, Page: 583 / 1082

Search results

Summary of Contents for Eternus DX200F

Reviews: