Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
680
•
Set management unit interface
•
Power Failure Signal
•
Low Battery Signal
Description
Select the external input device connected via RS232C interface.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3, and
the ETERNUS DX200F, the "Manual" setting is for particular use, thus should not be used
during normal operation.
Input condition/
Display contents
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Power Synchronized Unit
-
Manual
•
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3,
and the ETERNUS DX200F
-
Power Synchronized Unit
-
PMAN
-
Manual
Description
Select the signal logic for power failure signal when the power failure occurs.
When "Power Synchronized Unit" or "PMAN" is selected for the "Set management unit
interface" field, this item is automatically set.
Input condition/
Display contents
•
Positive
Positive logic
•
Negative
Negative logic
Description
Select the signal logic for a low battery signal when a low battery charge occurs.
When "Power Synchronized Unit" or "PMAN" is selected for the "Set management unit
interface" field, this item is automatically set.
Input condition/
Display contents
•
Positive
Positive logic
•
Negative
Negative logic
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
