Chapter 6 Thin Provisioning Pool Management
6.8 Modify Threshold Thin Provisioning Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
580
6.8
Modify Threshold Thin Provisioning Pool
This function changes the threshold for monitoring the used capacity of Thin Provisioning Pool. There are two
types of threshold: "Warning" and "Attention".
For details on the parameters for this function, refer to
"A.6.5 Modify Threshold Thin Provisioning Pool" (page
.
For the factory default settings for this function, refer to
"Appendix B Modify Threshold Thin Provisioning Pool"
The procedure to change the threshold of a TPP is as follows:
Procedure
1
Select the TPP for which the threshold is to be changed (multiple selections can be made)
and click [Modify Threshold] in [Action].
2
Select a new threshold.
•
This function changes the threshold of a TPP that is created by using the procedure in
•
Using this function enables setting the same threshold to multiple TPPs with a single operation.
•
Changes in the usage status of a TPP can be notified. The following statuses can be notified. Refer to
"1.9.1 Setup Event Notification" (page 144)
for details.
-
From "
Normal" to "
Attention"
-
From "
Normal" or "
Attention" to "
Warning"
-
The TPP capacity is exhausted
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
