Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
440
The procedure to modify a CA port group is as follows:
Procedure
1
Select the CA port group to be changed, and click [Modify Port Group] in [Action].
2
Specify the new name and add a port to the CA port group (select the checkbox) or delete a
port from the CA port group (clear the checkbox).
The main setting items are as follows.
●
CA Port Group Setting
•
Name
•
Checkbox to select ports
If an error screen appears under the following conditions, check the parameter settings.
•
The "Name" is not entered
•
The "Name" does not satisfy the input conditions
•
The "Name" overlaps with an existing port group name (port group names cannot overlap with any
other port group names, irrespective of the CA types.)
•
The total number of port groups has exceeded the maximum number for the ETERNUS DX
•
Nine or more ports are registered in the port group or no ports are registered in the port group
•
Ports with the affinity mode enabled (On) and disabled (Off) exist together
Ports that satisfy all of the following conditions are displayed.
•
"FC", "iSCSI", "SAS", or "FCoE" type CA ports (the same type as the selected CA port group)
•
The port mode is "CA" or "CA/RA (when the type is FC or iSCSI)"
•
Not used for the Storage Cluster function
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
