Fujitsu Eternus DX200F User Manual Download

Page: 461 / 1082

Chapter 4 Connectivity Management
4.3 CA Port Group Management

ETERNUS Web GUI User’s Guide (Settings)

P2X0-1270-13ENZ0

461

The procedure to change the port mode is as follows:

Procedure

Click [Modify Port Mode] in [Action].

Select the port mode to be changed over to.

The main setting item is as follows.

●

Port List

•

Port Mode (After)

Click the [Set] button.



A confirmation screen appears.

Click the [OK] button.



Port mode changeover starts.

Click the [Done] button to return to the [CA Port] screen.

End of procedure

If the specified FC-Initiator port is configured in Storage Migration path, an error screen appears. If
this occurs, check the parameter settings.

"RA" and "CA/RA" are displayed as options only for the models that support REC.

Summary of Contents for Eternus DX200F


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Eternus DX200F

Reviews:

Related manuals for Eternus DX200F

Brands by name

Popular brands

Fujitsu Eternus DX200F, User Manual

Search results

Summary of Contents for Eternus DX200F

Reviews:

Related manuals for Eternus DX200F

Brands by name

Popular brands