Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
512
4.8.7
Change NAS Server Name
This function changes the server name (host name) for the ETERNUS DX S3 series that is used for the NAS
system.
This function is used in a Unified Storage environment.
For details on the parameters for this function, refer to
"A.4.7.5 Change NAS Server Name" (page 894)
For the factory default settings for this function, refer to
"Appendix B Change NAS Server Name" (page 1002)
The procedure to change the server name that is used for the NAS system is as follows:
Procedure
1
Click [Change NAS Server Name] in [Action].
•
When performing Active Directory authentication, the ETERNUS DX S3 series' NAS engine uses the NAS
server name as the NetBIOS name. If the NAS server name is changed, the Active Directory
authentication server must be reconfigured.
•
If the Active Directory authentication server has already been registered before changing the NAS server
name, perform the following operations.
(1) Delete the setup information for the Active Directory authentication server before starting this
function.
(2) Execute this function to change the NAS server name and then register the Active Directory
authentication server again.
"4.8.9 Set Authentication Server" (page 515)
for procedures on how to delete and re-register the
Active Directory authentication server setup information.
•
As a factory default NAS server name, "DXyyyyyyyyyy" ("DX" is fixed and "yyyyyyyyyy" indicates the serial
number of the ETERNUS DX S3 series) is specified for the ETERNUS DX S3 series.
•
To revert back to the default NAS server name, clear the "Name" field and click the [Change] button.
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
