Fujitsu Eternus DX200F User Manual Download Page 525

Page: 525 / 1082

Chapter 4 Connectivity Management
4.8 NAS Management

ETERNUS Web GUI User’s Guide (Settings)

P2X0-1270-13ENZ0

525

Click the [Modify] button.



A confirmation screen appears.

Click the [OK] button.



Changing of the quota setting starts.

Click the [Done] button to return to the [Quota Management] screen.

End of procedure

In the following conditions, a warning message indicates that writing to the drive is prohibited
appears.

•

The modified limit value of the drive space is less than the currently used drive space

•

The modified limit value of the file count is less than the currently used file count

Summary of Contents for Eternus DX200F


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Eternus DX200F

Reviews:

Fujitsu Eternus DX200F, User Manual, Page: 525 / 1082

Search results

Summary of Contents for Eternus DX200F

Reviews: