Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
427
5
Click the [Done] button to return to the [iSCSI Host] screen.
End of procedure
4.2.17
Modify SAS Host
This function changes the SAS host information.
For details on the parameters for this function, refer to
"A.4.2.12 Modify SAS Host" (page 838)
The procedure to change the SAS host information is as follows:
Procedure
1
Select the SAS host to change the host information for, and click [Modify SAS Host] in
[Action].
2
Input new host information.
•
When no SAS hosts are registered, the [Modify SAS Host] function cannot be used.
•
When changing the SAS address of a SAS host that is currently being used, make sure to stop access to
that SAS host.
•
This function can change the following SAS host information; "Name" and "SAS Address". When the SAS
host is not registered in a host group, the "Host Response" setting can also be changed.
•
When the SAS host is registered in a host group, use the [Modify Host Group] function to change the host
response. Refer to
"4.2.8 Modify Host Group (SAS)" (page 399)
for details.
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
