Fujitsu Eternus DX200F, User Manual

Page: 800 / 1082

Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
800
• Volume Capacity
Description The capacity of the migration source volume is displayed as the initial state.
When expanding the volume capacity after migration, enter the volume capacity and
select the unit (MB/GB/TB) of capacity.
When this function starts, the capacity of the migration source volume is displayed.
Up to a 15-digit number including the "." (decimal point) can be input. Note that when
"MB" is selected, the specified value is rounded down to the nearest whole number.
When "GB" or "TB" is selected, the specified value is converted to "MB" and rounded down
to the nearest whole number.
When the migration destination volume type is "Standard", "TPV", or "FTV"
When the migration destination volume is "WSV"
Input condition/
Display contents
•
Numeric characters
•
MB/GB/TB
•
The ODX Buffer volume capacity can be expanded up to 1TB.
•
Volume capacity cannot be expanded in the following conditions:
-
"TPV" or "FTV" is selected as the migration source volume
-
The migration source volume is used for the Storage Cluster function
-
"Thin Provisioning Pool" or "Flexible Tier Pool" is selected as the migration destination
Up to 15 numbers can be used. If a decimal point is included in the input value, up to 14 numbers can be used.
[Example] 0.1234567890123 (14 numbers and a decimal point)
Migration source volume capacity

Volume capacity

The maximum free
space in the migration destination
Migration source volume capacity

Volume capacity