Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
344
11
Confirm the host affinity setting and the path between the host and the CA port, click the
[Create] button.
A confirmation screen appears.
12
Click the [OK] button.
The host affinity creation starts.
13
Click the [Done] button to return to the [Connectivity] screen.
End of procedure
■
When "Host - CA Port" is selected for "Target Connection"
The procedure to create a host affinity is as follows:
Procedure
1
Click [Create Host Affinity] in [Action].
If an error screen appears under the following conditions, check the parameter settings.
•
When the host interface type of the host group and the CA type of the CA port group do not match
Note that the CA types of "FCoE" and "FC" are regarded as the same CA type.
•
When the number of host affinities exceeds the maximum number per ETERNUS DX
•
When the number of hosts exceeds the maximum number per CA port
•
When a host cannot recognize some LUNs
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
