Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
419
(4)
Click the [OK] button
Returns to the [Manual Input] screen.
(5)
Repeat
through
when registering several SAS hosts.
(6)
After registering the SAS host is complete, click the [Add] button.
A confirmation screen appears.
3
Click the [OK] button.
Registration of the SAS host starts.
If an error screen appears under the following conditions, check the parameter settings.
•
The "Name" is not entered
•
The "Name" does not satisfy the input conditions
•
The "Name" is already used for the registration target host
•
The "SAS Address" is not entered
•
The "SAS Address" does not satisfy the input conditions
•
The "SAS Address" is already used for the registration target host
If an error screen appears under the following conditions, check the parameter settings.
•
The same "Name" is already used in the ETERNUS DX
•
The same "SAS Address" is already used in the ETERNUS DX
•
The number of hosts that is to be registered is "0"
•
The number of registered hosts has exceeded the maximum number for the ETERNUS DX
Summary of Contents for Eternus DX200F
Page 2: ...This page is intentionally left blank ...
Page 1082: ......
