Fujitsu Eternus DX200F User Manual Download

Page: 235 / 1082

Chapter 2 Component Management
2.5 Turn on Locator Beacon/Turn off Locator Beacon

ETERNUS Web GUI User’s Guide (Settings)

P2X0-1270-13ENZ0

235

■

Turning on the LED

The procedure to turn on an LED is as follows:

Procedure

Click [Turn on locator beacon] in [Action].



A confirmation screen appears.

Click the [OK] button.



The locator beacon is turned on.

Click the [Done] button to return to the screen when starting this function in

Step 1

End of procedure

■

Turning off the LED

The procedure to turn off an LED is as follows:

Procedure

Click [Turn off locator beacon] in [Action].



A confirmation screen appears.

If the LED is already turned on, [Turn on locator beacon] cannot be selected.

If the LED is already turned off, [Turn off locator beacon] cannot be selected.

Summary of Contents for Eternus DX200F


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Eternus DX200F

Reviews:

Related manuals for Eternus DX200F

Brands by name

Popular brands

Fujitsu Eternus DX200F, User Manual

Search results

Summary of Contents for Eternus DX200F

Reviews:

Related manuals for Eternus DX200F

Brands by name

Popular brands