Fuji Electric ALPHA7, User Manual

Page: 390 / 662

CHAPTER 6 KEYPAD
Positioning Data Edit Mode
6-37
6
4
6.8 Positioning Data Edit Mode
Positioning data can be edited in positioning data edit mode.
Each piece of positioning data contains the following seven items.
Po.01.1
: Positioning status
Po.01.2
: Target position
Po.01.3
: Rotation speed
Po.01.4
: Stand still timer
Po.01.5
: M code
Po.nn.6
: Acceleration time
Po.nn.7
: Deceleration time
( nn is the positioning data No. (address).)
(1) Positioning status
Set data relevant to the positioning data.
SET
(1秒以上)
ESC
SET
(1秒以上)
ESC
SET
(1秒以上)
ESC
∧／∨
番号（アドレス）選択
・ ∧／∨キーで番号を選択
項目選択
・ ∧／∨キーで番号を選択
∧／∨
番号選択、
項目選択までは
共通手順です。
（以降は割愛）
点滅
Po_01
Po.01. -
Po.31. -
Po.01.1 Po.01.7
A.00.0
Editing screen

Refer to " ■ Display and editing" in "6.7 Parameter Edit Mode".
SET
(1 sec. or over)
SET
(1 sec. or over)
SET
(1 sec. or over)
No. (address) selection

Select the number with the
[
∧
]/[
∨
] keys.
Item selection

Select the number with the
[
∧
]/[
∨
] keys.
The procedure is the
same up to number
selection and item
selection. (omitted
thereafter)
Flashing