Fuji Electric ALPHA7, User Manual

Page: 371 / 662

CHAPTER 6 KEYPAD
6-18
Monitor Mode
6
4
(8) Command position (displayed digits: signed 10 digits)
The position of the servomotor controlled by the servo amplifier is displayed in the unit amount
after correction with an electronic gear. If the operation command is turned off and the load
(mechanical system) rotates the motor after the target position is reached, the position is not
correct. For indication, refer to "(7) Feedback position."
L7890 C3456
- -- 12
H -- 12
on_08
SHIFT
キーを押す毎に、
H/C/L 画面が切り換わります。
SET
(1秒以上)
ESC
SIFT SIFT
表示値が負の場合は、H/C/Lと負符号を
交互に表示します。
SIFT
(9) Position deviation (displayed digits: signed 10 digits)
The difference between the command position and feedback position is displayed. The unit for the
deviation amount is based on the deviation unit selection in PA1_31.
L7890 C3456
- -- 12
H -- 12
on_09
SHIFT キーを押す毎に、
H/C/L
画面が切り換わります。
SET
(1秒以上)
ESC
SIFT SIFT
表示値が負の場合は、H/C/Lと負符号を
交互に表示します。
SIFT
SET
(1 sec. or over)
SET
(1 sec. or over)
ESC
If the display value is negative, the display changes
alternately between H/C/L and the minus sign.
The display changes between H/C/L each
time the SHIFT key is pressed.
ESC
If the display value is negative, the display changes
alternately between H/C/L and the minus sign.
The display changes between H/C/L each
time the SHIFT key is pressed.