Fuji Electric ALPHA7, User Manual

Page: 143 / 662

CHAPTER 2 WIRING
2-96
Description of I/O Signals
2
Output at completion (after completion)
M codes are output when the positioning operation is complete and then held.
Rotation speed
Operation prep.
complete [RDY]
Simultaneous M code simultaneous
Time
ON
ON OFF
Auto start
AD4 to AD0
5 15
Positioning
complete (level)
ON OFF ON
M code
Timer time
(positioning data)
* Positioning data is executed while the timer time is counting up.
* The default M code is FF.
FF 20
M code 20
Position preset completion: Sequence output signal (Reference value 75)
The signal is output after position preset (position change) is executed and completed.
 Function
If position preset is executed in an established ABS system (absolute system) to reset from an
alarm or change the current position, the sequence output corresponding to position preset
completion is turned on after position preset is finished.
 Parameter setting
To assign the position preset completion to a sequence output terminal, specify the corresponding
value ("75") to the output terminal function setting parameter.