Fuji Electric ALPHA7, User Manual

Page: 272 / 662

CHAPTER 4 PARAMETER
Automatic Operation Setting Parameters
4-81
4
PA2_41 Sequential start selection
No. Name Setting range
Default
value
Change
41
Sequential start selection 0: Disable 1: Enable
2: Homing 3: Immediate value operation
0 Power
Select whether sequential start is enabled or disabled.
For details of sequential start, refer to “CHAPTER 12 POSITIONING DATA”
PA2_42 Decimal point position of stand still timer
No. Name Setting range
Default
value
Change
42
Decimal point position of
stand still timer
0: 0.01 1: 0.001 0 Always
Select the least input increment of the stand still timer.
Selection can be made between 1 [ms] and 10 [ms].
PA2_43 Output selection at M code OFF
No. Name Setting range
Default
value
Change
43
Output selection at M
code OFF
0: 00’H 1: FF’H 1 Power
Select the output signal status at M code shutoff.
For details of the M code, refer to “CHAPTER 12
POSITIONING DATA”