FATEK SD3 Series, Instruction Manual, Page: 68 / 396

16
USB mini B
3. Preparation
SD3 Series Instruction Manual
2. System Wiring
Name Code Pin No. Signal Description
Main Circuit Power L1L2
1 L1 Main power cable 1
2 L2 Main power cable 2
Motor Power
UVW /
B1B2
1 U Motor power U-phase
2 V Motor power V-phase
3 W Motor power W-phase
4 B1 Regenerative resistor connection (+)
5 B2 Regenerative resistor connection (
-
)
Encoder CN2
1 VCC Encoder power supply +5 V
2 SG Signal ground
3, 4 - (No Connect)
5 +D Serial communication data +Data
6 −D Serial communication data −Data
- FG SHIELD wired to the connector casing
PC Communication CN3
1 VBUS USB power supply +5 V
2 D− USB data −
3 D+ USB data +
4 - (No Connect)
5 SG USB signal ground
User I/O CN1
Route power and signal wiring suitable for your operation mode.
4
Connections
Amplifier
Amplifier Connectors and Pinouts
PC Communication Connector
UC60SC-MB-5ST (Hirose Electric)
User I/O Connector
DF02R050NA1 (JAE)
Encoder Connector
3E106-2230KV (3M)
Motor Power Connector
2092-1325 (WAGO JAPAN)
Main Circuit Power Connector
2092-1422 (WAGO JAPAN)
Plug
10150-3000-PE (3M)
Cover
10350 (3M)
or Equivalent alternatives
Wires: AWG26
Connector
3E206-0100KV (3M)
Cover
3E306-3200-008 (3M)
Wires: AWG22 (Power), AWG24 (Signal)
2092-1525 / 002-000 (WAGO JAPAN)
Wires: AWG18 (UL)
2092-1102 / 002-000 (WAGO JAPAN)
Wires: AWG18 (UL)
Accessories
Accessories