FATEK SD3 Series, Instruction Manual, Page: 219 / 396

77
5
Setting Parameters
5. Setting Parameters
SD3 Series Instruction Manual
5. Parameters
5. Parameters
No. 267.0
Encoder:
Overheat detection - Value
Range Default Characteristics
0 to 127
85
[° C]
Function
Use
Set the value to detect overheat of the encoder. (for reference only)
Related To No.259.0
No. 268.0
Encoder:
Battery voltage drop detection - Value
Range Default Characteristics
0 to 100
24
[0.1 V]
Function
Use
Set the value to detect voltage drop of the encoder.
Related To No.259.0
No. 272.1
Encoder pulse output:
Rotational direction
Settings Default Characteristics
0, 1 0
Function
Use
Set the rotational direction of encoder pulse output.
This indicates the direction of counting pulses in ccw rotations.
Settings In CCW rotation
0 Count down
1 Count up
Related To No.276.0, No.278.0
Common Position Control Pulse Train Command Position Control Internal Command
Velocity Control Analog Command Velocity Control Internal Command Torque Control Analog Command
Communication Operation Mode Operation Control
Alarm Detection Tuning Homing
Torque Limit Deceleration Stop and so on Vibration Control
Switch Selection Numeric Value
Control Power Cycle 2-Byte Data 4-Byte Data
-
-