FATEK SD3 Series, Instruction Manual, Page: 153 / 396

11
5
Setting Parameters
5. Setting Parameters
SD3 Series Instruction Manual
3. Using the Setup Panel
3. Using the Setup Panel
10 ABS Position Deviation State
11 Positioning Command Value
[ command pulse ]
Indicates the difference between ABS Position Command
(Status No.74) and ABS Position Feedback (Status No.76)
[ encoder pulse ]
Indicates the position command value input to the position loop
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
Status No. 80
Status No. 65
Indicates the motor angular position detected by encoder
[ encoder pulse ]
Indicates the difference between the position control value and
the position feedback value
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
12 Position Feedback
13 Position Deviation
Status No. 67
Status No. 69
[ encoder pulse ]