FATEK SD3 Series, Instruction Manual, Page: 269 / 396

25 SD3 Series Instruction Manual
Operation
６
6. Operation
5. Position Control Mode
5. Position Control Mode
Precautions for Testing
Testing
Before powering to each amplifier or motor, be sure that
wiring has been performed correctly.
Set the parameters correctly before testing.
Check motor motions first with no machines being connected.
For a brake-equipped motor, be sure to disengage the brake
before driving the motor.
Using "Servo Studio", check motions per the point table that you created.
"Servo Studio" User's guide
3. Press
1. Save the Point Table data to the amplifier.
Click
2. Select ◉ "Servo Studio"
as Command Type.
4. Enter a Point No. to start with.
5. Start a motion
:Start :Pause :Stop