FATEK SD3 Series, Instruction Manual, Page: 148 / 396

6
P. 7
P. 17
P. 19
P. 20
P. 21
P. 23
P. 24
5. Setting Parameters
SD3 Series Instruction Manual
3. Using the Setup Panel
3. Using the Setup Panel
Turn on the control power of the amplifier and then press twice to bring up the main menu.
On the main menu, select the mode you are to setting up, then press to see the sub-menu.
Sub-menu Main Menu
Status Display Mode
Alarm Display Mode
Parameter Setting Mode
Quick Tuning Mode
Auto Tuning Mode
Parameter Saving Mode
Auxiliary Function Mode
Turn the control power on.
Approximately
5 seconds
Switch to the Status Display screen.
Normal End
Abnormal End
SET
SET
SET
or
: Servo-ON state
: Servo-OFF state
: Speed feedback value [r/min]
3 seconds
Initial display