FATEK SD3 Series, Instruction Manual, Page: 185 / 396

43
5
Setting Parameters
5. Setting Parameters
SD3 Series Instruction Manual
5. Parameters
5. Parameters
No. 67.0
Drive restriction input:
Setup
Settings Default Characteristics
0 to 3 0
Function
Use
By installing sensors at the ends of linear motion, you can restrict the drive beyond
the motion range.
When "Enable" is selected for this parameter, starting the motor will be blocked by I/O input ON.
Settings CW Drive restriction CCW Drive restriction
0 Disable Disable
1 Enable Disable
2 Disable Enable
3 Enable Enable
Related To No.67.1, No.67.2, No.67.3
No. 67.1
Drive restriction input:
Deceleration method
Settings Default Characteristics
0 to 2 1
No. 67.2
Drive restriction input:
Idling status
0, 1 0
Function
Use
Select the deceleration method upon drive restriction input and specify the idling
state after the motor stopped its motion.
Use one of the following four combinations.
Possible
Combinations
Deceleration method
(No.67.1)
Idling status
(No.67.2)
1 0: Free Run
0: Free Run
2 1: Short Brake
3
2: Quick Stop
1: Zero Clamp
4 0: Free Run
Prerequisite Drive restriction input: Setup (No.67.0) = 1, 2 or 3 (Enable)
Related To No.67.0, No.67.3
No. 67.3
Drive restriction input:
Retaining position deviation counter
Settings Default Characteristics
0, 1 0
Function
Use
Motor's stopping upon drive restriction input results in position deviation from
the input pulse.
Use this parameter to select either keep or clear that position deviation.
Settings Position Deviation Counter
0 Keep
1 Clear
Related To No.67.0, No.67.1, No.67.2