eta 0038/00, Instructions For Use Manual

Page: 86 / 192

WARMING
– Checkwhetherthesealingisputproperlyonitsplaceinthebowl,iscleanandis
notleakageoffluid.
– Maximum time of continuous operation is 60 seconds. 1pulse=2seconds .
– Chose the amount of ingredients to be processed so that the maximum content of the
containers marked by a line is not exceeded.
– When mixing liquids, never use larger volume than 80ml .
Recommendation
– Cut the big pieces of foodstuffs into cubes of dimension at about 1.5x1.5x1.5 cm.
– Herbs are best milled when clean and dry.
– Break ginger up before milling.
– Always add a little liquid when blending cooked ingredients to make baby food.
– When processing hard cheese, work only for a short time. During long work the cheese
could become warm and get lumped.
– For whole bean coffee – the quantity should be within the following range: minimum
30g / maximum 70g . When processing coffee, apply operation pulses according to the
required graininess of coffee.
– T he longer you process food in the chopper, the smoother the result will be.
– If you are not satisfied with the result, switch off the appliance, remove the chopper and
„shake“ the container to mix the ingredients. Alternatively, remove the knife and mix
with a wiper, remove some of the raw material, or add a small amount of liquid.
– The inner side of the container might change colour (become matt) and the container
might give out a characteristic smell in the process with hard ingredients but this does
not affect the function of the appliance and it is not a reason for a claim.
III. 14 ) Knife sharpener (T)
Description (Fig. 22)
T – Knife sharpener
Safetyhintsandtips
– Applicabletokitchenknivesofvariousmaterialsuniversalstainlesssteel.
– Do not use the attachment when the grinding rollers are damaged, when there are
visible cracks or splits.
– Do not use a pnife grinder while you are tired or under the influence of drugs, alcohol
or medication.
– Be careful with sharp knives and the knives you are going to sharpen.
– Make sure that only the blade of the knife comes into contact with the wheel.
– Never insert your fingers into the wheel.
– Do not use the sharpener with ceramic knives or knives with jagged edges and
scissors, axes or any tool.
Assembly
The sharpener T and connect it to the head of the drive unit according to Fig. 7. Apply
reverse procedure to disassemble the unit and to remove it from the motor unit head.
86
GB
/ 184