eta 0038/00, Instructions For Use Manual

Page: 84 / 192

III. 12 ) Attachment for ice-cream (R)
Description (Fig. 19)
R0 – maker body R3 – Cover with outlet
R1 – Spiral feeder R4 – Pusher
R2 – Sealing R5 – Hopper
Safetyhintsandtips
– Do not put the attachment or its components into a freezer or a refrigerator prior to use.
Material:
– The attachment for ice-cream is designed for processing almost all types of fruit (e.g.
berries/citrus ), or vegetables, or yogurt.
– Carefully wash the fruit or vegetables.
– Remove any stems (stalks e.g. grapes,currents,gooseberries,blueberries ) and
leaves, leave only the berries.
– Remove any pits (e.g.
plums,peaches,apricots,cherriesetc.
).
– Remove any thick peel (e.g. pineapple,melon ).
– Peel citrus fruit (e.g. oranges,grapefruit,satsumas,lemons ) and remove the white
pulp and seeds.
– We recommend processing fresh and ripe fruit – you will get tastier ice-cream.
– Cut the ingredients into pieces that fit into the opening of the hopper.
–
Atleast12-24hourspriortomakingice-cream,deep-freeze
theingredientsattemperatureof-18
o
C.
ATTENTION: Do not process the fruit and vegetables immediately after taking
them out of the freezer! Prior to processing, let the ingredients thaw “partially”
(i.e. unfreeze at room temperature). The time required for thawing depends
on the content / ratio of water and pulp, the temperature of freezing and the
size of the ingredient. The more watery the ingredient is (e.g. raspberries,
blueberries,melon ), the shorter the time is needed (about 5 minutes). The
thicker the ingredient is (e.g. mango,pineapple,apricots ), the longer the
time (about 20 minutes) of thawing is.
– Do not confuse the function of the attachment = frozen dessert maker with electric
ice-cream maker which uses a compressor for cooling.
AFTERSOMETIME,YOUWILLGETEXPERIENCEWITHTHEUSEOF
THE ICE CREAM MAKER THATWILLLEADTOGOODRESULTS.
Assembly
Assemble the ice cream maker R and connect it to the head of the drive unit according to
pic 7. Warning: Check whether the sealing R2 is put properly on its place in the cover with
outlet R3 . Apply reverse procedure to disassemble the unit and remove it from the motor
unit head.
Use
Put the food in the hopper one by one to prevent overfilling the ice-cream maker chute to the
top. The pusher R4 is intended for continuous pushing the food to the auger’s reach.
84
GB
/ 184