eta 0038/00, Instructions For Use Manual

Page: 69 / 192

Before the first use, wash all parts, which will be in contact with food, in warm water with
a mild detergent, thoroughly rinse in clear water and wipe dry or let dry. Put the assembled
food processor with the selected attachments on a flat, stable, smooth and clean worktop,
out of reach of children and incapacitated people. Provide sufficient free space for ventilation.
The appliance openings allow free airflow for ventilation, and must not be covered or
otherwise blocked. The feet must not be removed. Electric power socket must be easily
accessible to allow easy disconnecting of the food processor in the case of emergency.
III. 1 ) Food processor (A)
Description
(Fig. 1)
A1 – Multifunctional head release lever A6 – Removable cover
A2 – Speed regulating knob A7 – Multifunctional head
A3 – Bottom mount for adapters C1 - C5 A8 – Cover
A4 – Front mount for attachments A9 – Control panel with display
( D , M , G , I , H , J , O , N , Q,R,T ) A10 – Mount for attachments ( F , S )
A5 – Release button A11 – Power cord
B1 – Stainless bowl B3 – Feed tube cover
B2 – Bowl lid
Foodprocessorcontrol
Display and signal sounds / lights
When connected to the mains, you will hear a signal sound (beep), the display will come
on and the control light will start “flashing”.
– The display shows: the speed set, operating time or remaining time of operation (if the
time is set), food-processor input and safety lock activation.
– The POWER sign = shows the current input of the food-processor by means of
increasing “segments”.
– The TIME sign = shows either the operating time or the remaining time of operation
of the food-processor.
– The SPEED sign = shows the speed set from 1 to 8 .
– The
E03
sign = shows the safety lock activation.
– When the food-processor is in standby mode, the speed control knob
A2
is flashing.
– When in operation, the backlight of the speed control knob A2 is white. When maximum
allowed load is reached, the colour changes to red and the signal sound is activated.
Ifthisoccurs,turnofftherobotimmediately! The overload could have
occurred by large pressure on the ram or clogging of the accessories, possibly
by poor adjustment of the milling stones with the grain grinder or the poppy-seed
grinder. We recommend dismounting the accessories, cleaning them, possibly
adjusting them correctly and then proceeding according to the instructions in the
manual. Subsequently, process raw materials in smaller quantities and slower.
– When the set time expires, the food-processor will automatically switch off, you will hear
the signal sound three times, and the display light will flash three times. The speed
setting will now be displayed SPEED - (e.g. 5), TIME 00:00.
Tilting the multifunctional head downward/upward (Fig. 2)
Rotating the release lever
A1
slightly will lift the head upward. Rotating the lever
A1
further
and pushing the unit down will tilt the head downward.
GB
69 / 184