![background image](http://html1.mh-extra.com/html/esco/invt-gd350a-series/invt-gd350a-series_product-manual_2426081219.webp)
GD350A series high-performance multifunction VFD
-214-
Function
code
Name
Description
Default Modify
P13.11
Maladjustment
detection time
The function code is used to adjust the
responsiveness of anti-maladjustment
function. If the load inertia is large, increase
the value of the function code properly,
however, the responsiveness may slow down
accordingly.
Setting range: 0.0–10.0s
0.5s
○
P13.12
High-frequency
compensation
coefficient of SM
The function code is valid when the motor
speed exceeds the rated speed. If motor
oscillation occurred, adjust the function code
properly.
Setting range: 0.0–100.0%
0.0%
○
P13.13
High-frequency
injection current
0–300.0%
20.0%
◎
P13.14–
P13.19
Reserved
0–65535
0
○
P14 group––Serial communication
P14.00
Local
communication
address
Setting range: 1–247
When the master writes the slave
communication address to 0 indicating a
broadcast address in a frame, all the salves
on the Modbus/Modbus TCP bus receive the
frame but do not respond to it.
Local communication address is unique in
the communication network, which is the
basis for point-to-point communication
between the upper computer and the VFD.
Note:
The communication address of a slave
cannot be set to 0.
1
○
P14.01
Communication
baud rate
The function code is used to set the data
transmission speed between upper computer
and the VFD.
0: 1200BPS
1: 2400BPS
2: 4800BPS
3: 9600BPS
4: 19200BPS
4
○