GD350A series high-performance multifunction VFD
-105-
Setting
Function
Description
of braking torque upper
limit to keypad
is set through the keypad.
43
Position reference point
input
Valid only for S1, S2, and S3.
44
Disable spindle
orientation
Used to disable spindle orientation.
45
Spindle zeroing / Local
positioning zeroing
Used to trigger and enable spindle orientation.
46
Spindle zero position
selection 1
Spindle zero position selection 1 made through terminals
47
Spindle zero position
selection 2
Spindle zero position selection 2 made through terminals
48
Spindle scale division
selection 1
Spindle scale division selection 1 made through terminals
49
Spindle scale division
selection 2
Spindle scale division selection 2 made through terminals
50
Spindle scale division
selection 3
Spindle scale division selection 3 made through terminals
51
Terminal for switching
between position control
and speed control
Used to switch between position control and speed control
52
Disable pulse input
When this function is valid, pulse input is invalid.
53
Clear position deviation Used to clear the input deviation of the position loop.
54
Switch position
proportional gains
Used to switch position proportional gains.
55
Enable cyclic digital
positioning
When the digital positioning mode is valid, the cyclic digital
positioning function can be enabled.
56
Emergency stop
When this command is valid, the motor decelerates to
emergency stop according to the time set by P01.25.
57
Motor overtemperature
fault input
The motor stops at motor over-temperature fault input.
59
Switch from FVC to space
voltage vector control
When this terminal is valid in stop state, the space voltage
vector control mode is used.
60
Switch to FVC control
When this terminal is valid in stop state, the FVC mode is
used.
61
Switch PID polarities
Used together with P09.03.
62
Reserved
