GD350A series high-performance multifunction VFD
-171-
Function
code
Name
Description
Default Modify
42: Source of upper torque limit switches to
keypad
56: Emergency stop
57: Motor over-temperature fault input
59: Switch to V/F control
60: Switch to FVC control
61: PID polarity switch-over
66: Zero out encoder counting
67: Pulse increase
68: Enable pulse superimposition
69: Pulse decrease
70: Electronic gear selection
71: Switch to the master
72: Switch to the slave
73: Trigger fire mode control
74–79: Reserved
P05.07
Reserved
0–65535
0
●
P05.08
Input terminal
polarity
The function code is used to set the polarity of
input terminals.
When a bit is 0, the input terminal is positive;
when a bit is 1, the input terminal is negative.
0x000–0x3F
0x000
○
P05.09
Digital input filter
time
The function code is used to set the filter time
for S1–S4, HDIA, and HDIB. In strong
interference cases, increase the value to avoid
maloperation.
0.000–1.000s
0.010s
○
P05.10
Virtual terminal
setting
0x000–0x3F (0: disable, 1: enable)
BIT0: S1 virtual terminal
BIT1: S2 virtual terminal
BIT2: S3 virtual terminal
BIT3: S4 virtual terminal
BIT4: HDIA virtual terminal
BIT5: HDIB virtual terminal
0x00
◎
P05.11
Terminal control
mode
The function code is used to set the mode of
terminal control.
0: Two-wire control 1, the enabling consistent
0
◎
