Esco invt GD350A Series, Product Manual

Page: 117 / 380

GD350A series high-performance multifunction VFD
-112-
Setting Function Description
35 Reserved
36
Speed/position control switch-over
completed
Output is valid when the mode switch-over is
completed
37–40 Reserved
41 C_Y1 C_Y1 from PLC (You need to set P27.00 to 1.)
42 C_Y2 C_Y2 from PLC (You need to set P27.00 to 1.)
43 C_HDO C_HDO from PLC (You need to set P27.00 to 1.)
44 C_RO1 C_RO1 from PLC(You need to set P27.00 to 1.)
45 C_RO2 C_RO2 from PLC (You need to set P27.00 to 1.)
46 C_RO3 C_RO3 from PLC (You need to set P27.00 to 1.)
47 C_RO4 C_RO4 from PLC (You need to set P27.00 to 1.)
48–63 Reserved
Related parameter list:
Function
code
Name Description Default
P06.00 HDO output type
0: Open collector high-speed pulse output
1: Open collector output
0
P06.01 Y1 output selection 0: Invalid
1: In running
2: In forward running
3: In reverse running
4: In jogging
5: VFD fault
6: Frequency level detection FDT1
7: Frequency level detection FDT2
8: Frequency reached
9: Running in zero speed
10: Reach upper limit frequency
11: Reach lower limit frequency
12: Ready to run
13: In pre-exciting
14: Overload pre-alarm
15: Underload pre-alarm
16: Simple PLC stage completed
17: Simple PLC cycle completed
18: Reach set counting value 0
P06.02 HDO output selection 0
P06.03 RO1 output selection 1
P06.04 RO2 output selection 5