Epson AcuLaser C8500, Service Manual

Page: 344 / 570

EPSON AcuLaser C8500 Revision C
Chapter 4 Diagnostics 4-76
†
Parameter Code Explanation
NOTE: Only the main parameter code is explained here.
SLPON COMMAND PARAMETER
SSENG STATUS PARAMETER
NOTE: The parameters below are stipulated in Bit units.
SSDTCH STATUS PARAMETER
NOTE: The parameters below are stipulated in Bit units.
NOTE: The parameters below are stipulated in Bit units.
Table 4-26. SLPON Command Parameter
SLPON Command Code: [73}
Data (Hex) SLEEPMODE
0 LIGHT SLEEP Mode
1 DEEP SLEEP Mode
Table 4-27. SSENG Status Parameter
SSENG Status Code: [C0]
Data
(Bit) STSMODE STSMODE2 STSCALL
7 - LIGHT SLEEP
Mode Consumable parts error
(SSCONS command:[C1])
6 DIAG TEST Mode DEEP SLEEP Mode No paper
(SSTRAY command:[C2])
5 WARN UP Mode - CRUM error
(SSCRUN command:[C3])
4 Acknowledge Print
Quality Mode - Paper jam
(SSJAM command:[C4])
3 READY Mode - Hardware error
(SSHW command:[C5])
2 PRINT Mode - Life over
(SSLIFE command:[C6])
1 ERROR Mode - Cover open
(SSOPEN command:[C7])
0 - - Warming
(SSWARN command:[C8])
Table 4-28. SSDTCH Status Parameter
SSDTCH Status Code: [C1]
Data
(Bit) STSDTCH1 STSDTCH2
7 Cassette 1 None TONER CARTRIDGE Y None
6 Cassette 2 None TONER CARTRIDGE M None
5 Cassette 3 None TONER CARTRIDGE C None
4 - TONER CARTRIDGE Bk None
3 MAIN FUSER ASSY None -
2 WASTE TONER BOX None -
1 - -
0 - -
Table 4-27. SSENG Status Parameter
SSENG Status Code: [C0]
Data
(Bit) STSMODE STSMODE2 STSCALL