Epson AcuLaser C8500, Service Manual

Page: 286 / 570

EPSON AcuLaser C8500 Revision C
Chapter 4 Diagnostics 4-18
SLAVE INITIALIZE
[Slave Initialize] lets you initialize the contents of the [Slave] (delete the
contents.)
NOTE: If [Slave Initialize] is executed when communications are not
established, the Diagnostics Commander will hang up. Always
use another tab to make sure that communications are
connected and established before using [Master Read].
1) Click the [Slave Initialize] button.
2) When a message window is displayed, click on the [OK]
buttonbutton.
3) Initialization of the [Slave] starts.
NOTE: After initializing the [Slave], turning the power OFF/ON starts
automatic writing to the [Slave].
NOTE: Because, in some cases, there are procedures that must be
completed before turning the power OFF/ON after initializing the
[Slave], always follow the procedures in this manual.
FLASH WRITE
A program (FIRMWARE) for the engine control that it is stored in Flash
ROM on MCU PWB can be renewed with Flash Write by download by
the FIRMWARE down function.
NOTE: While downloading, never turn off the power supply of the
device and the personal computer.
NOTE: Remove all the connectors which surely connect an Optional
Feeder unit and a Duplex unit and a device itself electrically
when using FlashWrite. (Option Feeder unit : P/J132, P/J211
Option Duplex unit : P/J134, P/J75)
NOTE: Do the establishment of Dip-Switch of DIAG. PWB in
accordance with the way of connecting it though how to connect
DIAG. tool is two kinds surely.
1. As a preparation in advance, prepare for a file (***.mot) for download,
and copy the file in optional folder of the personal computer.
2. Click the [Flash Write] button.
W A R N I N G
Never execute [Slave Initialize] unless instructed to by
this manual.
W A R N I N G Use only the download file provided formally.
Cancel