Epson AcuLaser C8500, Service Manual

Page: 348 / 570

EPSON AcuLaser C8500 Revision C
Chapter 4 Diagnostics 4-80
4.2.7.3 Parameter Control
†
Command/Status
With distinction column [C/S] of the following command/status,
make a command [C] and a status [S], show [command/status code]
+ [parameter code] in the command/status column and a command/
status code of that will be shown soon in 16.
NOTE: [V1-V4] is still the numerical value of 10, and shows count
accumulation value more than the high rank in order.
C A U T I O N Don’t use without indicate in this manual except for
[LIFCNTSET (80)], [CTLSET (85)], [LIFCNTR (D0)],
[LIFLIMR (D1)], [CTLSETR (D7)] and [LIFWNGR (F0)]
command.
Table 4-35. Command/Status-Parameter Control
Name C/S Command/Status Explanation
LIFCNTSET C None -
S 80, LIFE, V1, V2, V3, V4 Write data to life
counter
LIFLIMSET C None -
S 81, LIFE, V1, V2, V3, V4 <Do not use unless
instructed to>
Change life limit
value
CTLSET C None -
S 85, CTL, V1, V2, V3 <Do not use unless
instructed to>
Change control
value
LIFWNGSET C None -
S 88, LIFE, V1, V2, V3, V4 <Do not use unless
instructed to>
Change life warning
value
LIFCNTR C D0, LIFE Read data of life
counter
S D0, LIFE, V1, V2, V3, V4
LIFLIMR C D1, LIFE Read life limit value
S D1, LIFE, V1, V2, V3, V4
, V5, V6, V7, V8
CTLSETR C D7, CTL Read control value
S D7, CTL, V1, V2, V3
STCCNR C DB, STC Read statistical
counter value
S DB, STC, V1, V2, V3
LIFWNGR C F0, LIFE Read life warning
value
S F0, LIFE, V1, V2, V3, V4
CRIDR C F2 Read CRUM ID
S F2, ID
CRMDR C F3 Read CRUM data
S F3, V1, V2, V3, V4 , V5
, V6, V7
Table 4-35. Command/Status-Parameter Control
Name C/S Command/Status Explanation