Emerson Micro Motion 2500, Configuration And Use Manual

Page: 86 / 238

Postrequisites
If you changed the setting of mA Output Process Variable, verify the settings of Lower
Range Value (LRV) and Upper Range Value (URV).
Options for mA Output Process Variable
The transmitter provides a basic set of options for mA Output Process Variable, plus
several application-specific options. Different communications tools may use different
labels for the options.
Standard mA Output process variables Table 6-1:
Process variable
Label
ProLink III Field Communicator
Density
Density Dens
Drive gain
Drive Gain Driv signl
External pressure External Pressure External pres
External temperature
External Temperature External temp
Gas standard volume flow rate Gas Standard Volume Flow Rate Gas vol flo
Mass flow rate Mass Flow Rate Mass flo
Temperature
Temperature Temp
Volume flow rate Volume Flow Rate Vol flo
Petroleum measurement mA Output process variables Table 6-2:
Process variable
Label
ProLink III Field Communicator
Average corrected density
Average Density TC Avg Dens
Average temperature
Average Temperature TC Avg Temp
Temperature-corrected (standard)
volume flow rate Volume Flow Rate at Reference Tempera-
ture TC Vol
Temperature-corrected density
Density at Reference Temperature TC Dens
Concentration measurement mA Output process variables Table 6-3:
Process variable
Label
ProLink III Field Communicator
Baume Baume ED Dens (Baume)
Concentration
Concentration ED Concentration
Density at reference
Density at Reference Temperature ED Dens at Ref
Integrate the meter with the control system
78 Micro Motion Model 2500 Transmitters with Configurable Input/Outputs