Emerson Micro Motion 2500, Configuration And Use Manual

Page: 38 / 238

For polling, the first transmitter (master) requests density from a second transmitter
(slave) via HART communications. Special units for GSV are allowed on the master side,
but the device being polled (slave) cannot have special units set for density, otherwise the
master will reject the base density and report an A115: No External Input or Polled Data
Alert.
Procedure
Set Gas Standard Volume Flow Unit to the unit you want to use.
The default setting for Gas Standard Volume Flow Unit is
SCFM
(Standard Cubic Feet per
Minute).
Tip
If the measurement unit you want to use is not available, you can define a special measurement unit.
Options for Gas Standard Volume Flow Unit
The transmitter provides a standard set of measurement units for Gas Standard Volume
Flow Unit, plus one user-defined special measurement unit. Different communications
tools may use different labels for the units.
Unit description
Label
ProLink III Field Communicator
Normal cubic meters per second Nm3/sec Nm3/sec
Normal cubic meters per minute
Nm3/sec Nm3/min
Normal cubic meters per hour Nm3/hr Nm3/hr
Normal cubic meters per day Nm3/day Nm3/day
Normal liters per second
NLPS NLPS
Normal liters per minute NLPM NLPM
Normal liters per hour
NLPH NLPH
Normal liters per day
NLPD NLPD
Standard cubic feet per second SCFS SCFS
Standard cubic feet per minute
SCFM SCFM
Standard cubic feet per hour SCFH SCFH
Standard cubic feet per day SCFD SCFD
Standard cubic meters per second
Sm3/sec Sm3/sec
Standard cubic meters per minute Sm3/min Sm3/min
Standard cubic meters per hour
Sm3/hr Sm3/hr
Standard cubic meters per day
Sm3/day Sm3/day
Standard liters per second SLPS SLPS
Standard liters per minute
SLPM SLPM
Standard liters per hour SLPH SLPH
Configure process measurement
30 Micro Motion Model 2500 Transmitters with Configurable Input/Outputs