Emerson Micro Motion 2500, Configuration And Use Manual

Page: 57 / 238

Option Setup
A value written by
digital communica-
tions a. Choose Online > Configure > Manual Setup > Measurements >
External Pressure/Temperature > Temperature .
b. Set External Temperature to
Enabled
.
c. Perform the necessary host programming and communications
setup to write temperature data to the transmitter at appropri-
ate intervals.
Note
If the Weights & Measures application is implemented and the trans-
mitter is secured, digital communications cannot be used to write
temperature or pressure data to the transmitter.
4.7.4 API tables supported by the petroleum measurement
application
The API tables listed here are supported by the petroleum measurement application.
Table
name
Process fluid CTL source data Reference temperature Density unit
5A Generalized crude and
JP4 Observed density and
observed temperature 60 °F (non-configurable) Degrees API
Range: 0 to 100
5B Generalized products Observed density and
observed temperature 60 °F (non-configurable) Degrees API
Range: 0 to 85
5D Lubricating oils Observed density and
observed temperature 60 °F (non-configurable) Degrees API
Range: − 10 to +45
6C Liquids with a constant
density base or known
thermal expansion coef-
ficient User-supplied reference
density (or thermal ex-
pansion coefficient) and
observed temperature 60 °F (non-configurable) Degrees API
23A Generalized crude and
JP4 Observed density and
observed temperature 60 °F (non-configurable) Relative density
Range: 0.6110 to 1.0760
23B Generalized products Observed density and
observed temperature 60 °F (non-configurable) Relative density
Range: 0.6535 to 1.0760
23D Lubricating oils Observed density and
observed temperature 60 °F (non-configurable) Relative density
Range: 0.8520 to 1.1640
24C Liquids with a constant
density base or known
thermal expansion coef-
ficient User-supplied reference
density (or thermal ex-
pansion coefficient) and
observed temperature 60 °F (non-configurable) Relative density
Configure process measurement
Configuration and Use Manual 49