EDM Solution 4+4, Installation Manual

Page: 33 / 174

MAINS Indicator
The
MAINS
indicator is used to indicate that the systems AC mains supply is normal or has
failed.
Indicator Definition
On AC Mains Power Normal
Flashing
AC Mains Failure
Table 9: MAINS Indicator
FAULT Indicator
The
FAULT
indicator is used to indicate that the system has detected a system fault. Refer to
"Fault Analysis Mode" on page 43 for more information.
Indicator Definition
On There Is A System Fault That Needs To Be Rectified
Off
The System Is Normal, There Are No Faults
Flashing There Is A System Fault Waiting To Be Acknowledged
Table 10: FAULT Indicator
Audible Indicators
In general, the audible indications given out by the codepad are as follows:
Indicator Definition
One Short Beep A Button Has Been Pressed On The Codepad
Or End Of Exit Time When Armed In STAY Mode
Two Short Beeps
The System Has Accepted Your Code
Three Short Beeps The Requested Function Has Been Executed
One Long Beep Indicates The End Of Exit Time In AWAY Mode Or The
Requested Operation Has Been Denied Or Aborted
One Short Beep Every Second Walk Test Mode Is Currently Active
One Short Beep Every Two
Seconds
Telephone Monitor Mode Is Active
One Short Beep Every Minute
There Is A System Fault Waiting To Be Acknowledged
Table 11: Audible Indications
System Indicators and Operations 33
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC