EDM Solution 4+4, Installation Manual

Page: 34 / 174

CP5 Eight Zone LCD Codepad
The codepad is the communications interface between you and your alarm
system. It allows you to issue commands and offers both visual and audible
indications that guide you through the general operation.
The codepad incorporates numerous indicators. There are ZONE indicators
which are used to show the condition of each zone and nine others for
general status. The following is a list of situations and the relevant
indications that will be seen.
Figure 2: CP5 Eight Zone LCD Codepad
(CP508L)
Zone Indicators
1 2 3 ....
The ZONE indicators are used to show the status of the zones. The following table lists the
various circumstances that the indicators will display (ie. Zone Sealed, Zone Unsealed).
Indicator Definition
On Zone Is Unsealed
Off Zone Is Sealed
Flashing Fast
(0.25 Sec On – 0.25 Sec Off)
Zone Is In Alarm Condition
Flashing Very Fast
(0.1 Sec On – 0.1 Sec Off)
Tamper Zone Is In Alarm Condition
Flashing Slow
(1 Sec On – 1 Sec Off)
Zone Is Manually Isolated
Flashing Very Slow
(2 Sec On – 1 Sec Off)
Tamper Zone In The Unsealed State
Table 12: Zone Indicators
AWAY Indicator
The
AWAY
indicator illuminates when the system is armed in AWAY Mode. The
indicator will also illuminate when the system is armed in AWAY Mode.
Indicator Definition
On System Is Armed In AWAY Mode
Off System Is Not Armed In AWAY Mode
Table 13: AWAY Indicator
STAY Indicator
The STAY indicator illuminates when the system is armed in STAY Mode. The and
indicators will also illuminate when the system is armed in STAY Mode.
Indicator Definition
On System Is Armed In STAY Mode
Off System Is Not Armed In STAY Mode
Flashing System Is In Isolating Mode
Table 14: STAY Indicator
34
Solution 4+4
Installation Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited